Home » How to install white walls tires for your VW Beetle?

How to install white walls tires for your VW Beetle?

Install VW Beetle white walls

If you want your car to look at its best and you also want to boost its visual appeal, you should consider the idea to install white walls for VW Beetle. It can be a great investment, however it might be a little hard to do that on your own. If you have a little trouble with the process, we are here to help!

Install VW Beetle white wall tires with a tire machine

In order to start the process you will need to have a tire machine. You need to break the bead off of the rim and then you have to make sure it’s broken all around. Set the tire on the tire machine, tighten it up and then you get a bead sealer. Put the sealer between the tire and rim. You do need to have a clean rim if you want the best results, so keep that in mind. Get the white wall, insert it in between the rim and the tire.

VW Beetle white wall tires

VW Beetle white wall tires

It has to go in dry, if not it will fly down the road. Add air into the tire and wait until the bead pops. That’s when you know the tire is seeded into the rim. Get a rubber mallet and start pressing the white wall. Remember that the you need to add the valve into the valve stem, tighten it up, add more air.

Add as much air as you can because this will help sit in nicely, not to mention that it will provide a much better result. Hammering down might be hard at first especially but remember that there you need to avoid any air patches. Make sure that it’s nice and flat to get the best outcome. Don’t rush, just take your time. Inflate air once again.

Add some soapy water then spray the outside. If there is any air coming out, you will have to try and continue the process in order to eliminate any problematic issues that might appear here. You will have to try and repeat the process until you see no bubbles. It might seem problematic at first, but this will actually provide you with the guidelines that you need in order to deliver faster and better results. While it might take a little bit of time at first, it’s exactly what you need to do if you want to ensure proper results when you install white walls.

And that’s how you install white walls for VW Beetle. It’s a very good process that will help protect your car and it will also offer that good set of visuals that you want to see from a Beetle model. It might not be easy to find a good model to suit your needs, but most of the time this will do just fine. Keep that in mind and results will pay off! As we mentioned earlier, you need to avoid installing any VW Beetle White Walls if you don’t have patience, as this is a process that does eat up quite a bit of time so you want to make sure that you are ready for this type of task!

Install white wall tires without tire machine

It is possible to install white wall tires without using a tire machine. It requires a little more intensive work, however it is certainly possible. Before you start, you need a few tools: a car jack and jack stands, a screwdriver, a lug nut wrench, clean cloths, coarse sandpaper, a rubber mallet with the head wrapped in plast and ofcourse the white walls with the correct measurements for your tire.

First and foremost, you have to jack up the car so that the wheels no longer touch the ground. Use the jack stands to hold the VW Beetle in place. Then, use the screwdriver and lug nut wrench to loosen the wheels and carefully lay them flat on the ground.

Next, let some air out of the tire until you are able to access the VW Beetle rim. You can use some degreaser and a cloth to wipe the inside of the rim until there is no dirt, grime or sticky residue left. This step is very important. The rim has to be clean or the white wall won’t stay in place.

The sandpaper is used to smooth the inside edge of the tire all the way around. The sandpaper allows you to remove any residual debris and it creates an even surface for the white wall to rest on. Then again, clean the edge of the tire a second time when you are done with the sandpaper.

Now, align the white wall with the edge of the tire and push the lip under the rim. If it doesn’t lie flat, let out a little more air and gently tap the white wall into place with the rubber mallet.

We’re almost there: slowly re-inflate the VW Beetle tire to the proper tire pressure. Keep an eye on the alignment of the Sidewall during this process and adjust it as necessary. You may need to stop and use the mallet to tap the white wall back into place as you go.

This tire is ready. Now repeat this process for the next three tires.

How do you clean white walls?

Here are three ways how to clean your VW Beetle white wall tires.

Give your VW Beetle white wall tires a basic cleaning

  1. Use a specialized cleaner. Look for a specific whitewall tire cleaner in the automotive section of a department store or hardware store. Regular cleaners like Comet can work well to remove dirt and discoloration on the tires. However, pay attention because they can dry out the tires in the process, leading to early wear. For that reason, you might avoid products that contain alcohol or chorine bleach. For the best results, opt for all-natural whitewall tire cleaners (e.g. Simple Green).
  2. Wet the tires and cleaning pad. Use an SOS pad for regular cleaning of whitewall tires. Use a hose to wet the tires. Wet the SOS pad as well.
  3. Apply the cleaning product. If it is a liquid, mix the product in a bucket with water (as per the directions on the label). If your chosen tire cleaning product is in spray form, spray it directly onto wet tires. Soak your SOS pad in the mixture.
  4. Scrub tires thoroughly. This is the hardest, but most important part. Put a generous effort into cleaning your whitewall tires thoroughly. The effectiveness of the cleaning is just as contingent on the duration and intensity of the scrubbing as it is to the products used.Having someone that helps you is fun during this step of the proces.
  5. Rinse off your tires. Rinse your tires every few minutes while you wash them to see how clean they are getting. Reapply your cleaning product and continue until you are satisfied with the results after rinsing. After you have scrubbed your tires clean, use the hose to rinse them off thoroughly.

Keep your Beetle white wall tires clean

  1. Clean them at least every two weeks. To keep your whitewall tires clean and avoid having to give them a heavy duty cleaning, take the time to wash them at least every two weeks. Use water, whitewall tire cleaner and a rag or sponge. If you do this cleaning frequently enough (e.g. every week), a gentle soap should be effective enough to use. If there is persistent dirt or discoloration, which is less likely if tires are regularly cleaned, use a stronger whitewall tire cleaner and scrub pad.
  2. Use tire dressing. After cleaning whitewall tires, use a water-based dressing to give your tires shine and protect them from harmful UV rays. Purchase the dressing and a foam applicator for it in the automotive department of most department stores, or online. Apply the foam to the applicator and wipe it onto your tires evenly until the desired effect is reached.
  3. Give them ample space in storage. When storing your whitewall tires, give them ample space so that they don’t have to lean against each other. This may cause the black rubber of the tires to rub against the white rubber, smudging them. If you do have to lean them against each other, separate the tires with plastic sheeting or store them in individual bags.

Whitening the VW Bug tires

  1. Use baking soda. Sprinkle baking soda onto a damp cloth or sponge. Wipe the surface of your whitewall tires in small, circular motions. Rinse the tires clean. Rinse the cloth and reapply baking soda every few minutes until you’re satisfied with the results.
  2. Try eraser cleaning pads. To whiten your tires, try eraser cleaning pads (like Mr. Clean Magic Eraser pads). Wet both the pad and your tires and wipe the tires down in small, circular motions. For best results, rinse or replace the pads between tires.
  3. Use sand paper to remove stubborn yellowing. If tires remain yellowed after persistent cleaning, sand the top layer of the white part with fine, dry sand paper. Sand away the yellowed layer slowly and gently until a bright white layer emerges underneath. Rinse tires clean with the hose.

Buy VW Beetle white walls

White walls are a very common item with parts sellers. You can order them very easily. Fill out this VW Beetle parts request and get the best quote from multiple sellers.

Share This Post
Have your say!
0 0

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>